Ibarmia 18 to 25 mm Specification

Ibarmia 18 - 25 Specification

Shown above, left - model TM, right - model TS (moving head), both shown on optional PKA base. TL floor model not shown

TECHNICAL DATA	TM-18	TS-18	TL-18	TM-25	TS-25	TL-25
Drilling capacity in mild steel	18 mm	18 mm	18 mm	25 mm	25 mm	25 mm
Motor	0.8 kW 3 phase	0.8 kW 3 phase	0.8 kW 3 phase	1.1 kW 3 phase	1.1 kW 3 phase	1.1 kW 3 phase
Spindle	3 MT	3 MT	3 MT	3 MT	3 MT	3 MT
Drive	Gears	Gears	Gears	Gears	Gears	Gears
Spindle speeds rpm 50Hz	75 - 160 - 250 - 420 - 510 - 850 - 1450 - 2800	75 - 160 - 250 - 420 - 510 - 850 - 1450 - 2800	75 - 160 - 250 - 420 - 510 - 850 - 1450 - 2800	75 - 160 - 250 - 420 - 510 - 850 - 1450 - 2800	75 - 160 - 250 - 420 - 510 - 850 - 1450 - 2800	75 - 160 - 250 - 420 - 510 - 850 - 1450 - 2800
Spindle travel	120 mm	120 mm	120 mm	120 mm	120 mm	120 mm
Throat depth	250 mm	250 mm	250 mm	250 mm	250 mm	250 mm
Column diameter	100 mm	100 mm	100 mm	100 mm	100 mm	100 mm
Table - overall	300 x 270 mm	n/a	300 x 270 mm	300 x 270 mm	n/a	300 x 270 mm
Base - overall	560 x 380 mm	560 x 380 mm	600 x 380 mm	560 x 380 mm	560 x 380 mm	600 x 380 mm
Max distance spindle to table	320 mm	n/a	640 mm	320 mm	n/a	640 mm
Max distance spindle to base	530 mm	500 mm	n/a	530 mm	500 mm	n/a
Overall height	1230 mm	1210 mm	1925 mm	1230 mm	1210 mm	1925 mm
Approx nett weight	165 kg	135 kg	185 kg	165 kg	135 kg	185 kg